This servo motor carriage drive is suitable for DGI XP, VTIII, VT-100D, MegaJet and SpaceJet series printers. This is the original DGI part. This motor suits 220V printers. This motor feeds the media.
SKU: TS4507N1002E200
There are 19 products.
This PS-3204D AC Servo Motor is suitable for DGI printers. SKU: HC-KFS73
This servo motor is suitable for Agfa / Gandinnovations Jeti printers. This is the original Agfa / Gandinovations part (number 376-003437). The cable of this servo motor is 255mm long.
SKU: 376-003437
Manufacturer part number: 376-003437
This generic carriage Y motor axis with pulley is suitable for Mimaki JV5 printers. This is a high quality generic motor that corresponds to Mimaki part number M009195. This complete motor includes the pulley. The motor without pulley is also available (part number E300475) but we recommend purchasing the complete motor as it is easier to install. The cable of this motor is 40cm long.
SKU: PMOMIJV503O
Manufacturer part number: M009195
This 2 phase Step Motor is suitable for AGFA Anapurna M-series printers.
SKU: TS3653N13E8
Manufacturer part number: D2+2501123
Original Y motor assembly (carriage motor) with fitted gear suitable for Mimaki JV3 and JV22 printers. This is the original Mimaki part (number M005144 replacing numbers E300342 / E300440).
SKU: M005144
Manufacturer part number: M005144
This Servo Motor Carriage (400W) is suitable for Agfa :Anapurna M4f printers. This is the original Agfa part (number D2+7590105-0003).
SKU: D2+7590105-0003
Manufacturer part number: D2+7590105-0003
This Y Motor is suitable for Mimaki JV33 & JV4 series printers.
SKU: M011924
Manufacturer part number: M011924
This rail servo Motor is suitable for Gandinnovations Jeti printers. This is the original Gandinnovations part (376-003471 replacing 376-004780). This motor is compatible with the following printers: 3312 -- serial number 3.30618 or higher 3318 -- serial number 3.318121 or higher 5000 -- serial number 5.0466 or higher 3150 -- serial number 3.15064 or higher
SKU: 376-004650
Manufacturer part number: 376-004650
This X-Axis Motor is suitable for Mimaki JV4 / TX2 printers. This is the original Mimaki part (number E300294).
SKU: E300294
Manufacturer part number: E300294
This rail servo Motor is suitable for Gandinnovations Jeti printers. This is the original Gandinnovations part (376-003471 replacing 376-004780). This motor is compatible with the following printers: 3312 -- serial number 3.30618 or higher 3318 -- serial number 3.318121 or higher 5000 -- serial number 5.0466 or higher 3150 -- serial number 3.15064 or higher
SKU: 376-004650
Manufacturer part number: 376-004650
This DC Motor Assy is suitable for Mimaki CG-160FX cutting plotters. This is the original Mimaki part (number E300461 replacing number E300390). The black and white cable is 34.5cm long. The black cable is 36cm long.
SKU: E300461
Manufacturer part number: E300461